# EWIS Target Group 1 & 2 — Initial Training > EASA-aligned EWIS TG 1 & 2 initial training online. AMC 20-22 modules, final assessment and a named certificate on mxcourse.net. - Course code: EWIS-TG12 - Price: 65.00 EUR per seat - Classroom equivalent: 8 hours - Pass mark: 75% - HTML syllabus: https://mxcourse.net/courses/EWIS-TG12 Online EWIS knowledge and decision training aligned to AMC 20-22 Target Group 1 maintenance and Target Group 2 inspection objectives. Supports role-based organisational training; hands-on performance, competence assessment and task authorisation remain separate. Includes fictional scenario practice and a separate final knowledge examination. Classroom-equivalent hours are a planning estimate, not measured attendance or a prescribed minimum. This online aviation training course is designed for controlled seat assignment, recorded trainee progress, final assessment, and certificate issue after passing. Course revision 2, reviewed 2026-09-10. References support the training scope; operational use requires current applicable rules and the organisation’s accepted procedures. ## Syllabus 11 modules, completed in order. 1. Introduction & Course Objectives - Keywords: scope, objectives, target groups, assessment - Objective: Explain introduction & course objectives and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 2. Why EWIS Matters — Background & Lessons Learned - Keywords: EWIS, accidents, ageing wiring, lessons learned - Objective: Explain why ewis matters — background & lessons learned and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 3. Key Definitions & Terminology - Keywords: EWIS definition, wire, harness, terminology - Objective: Explain key definitions & terminology and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 4. Module A — General EWIS Practices - Keywords: general practices, safe handling, protection, workmanship - Objective: Explain general ewis practices and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 5. Module B — Wiring Practices Documentation - Keywords: wiring manuals, SWPM, standard practices, data - Objective: Explain wiring practices documentation and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 6. Module C — Inspection - Keywords: inspection, criteria, damage, zonal inspection - Objective: Explain inspection and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 7. Module D — Housekeeping & Contamination Control - Keywords: housekeeping, contamination, debris, fluids - Objective: Explain housekeeping & contamination control and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 8. Module E — Wire - Keywords: wire types, insulation, ratings, selection - Objective: Explain wire and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 9. Module F — Connective Devices - Keywords: connectors, terminals, splices, grounds - Objective: Explain connective devices and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 10. Module G — Connective-Device Repair - Keywords: repair, contact replacement, crimping, approved methods - Objective: Explain connective-device repair and evaluate the section’s fictional evidence within the limits of role, data and authorisation. 11. References & Further Reading - Keywords: AMC 20-22, SWPM, references - Objective: Explain references & further reading and evaluate the section’s fictional evidence within the limits of role, data and authorisation. ## Final assessment - Format: 12 multiple-choice questions drawn from the course question bank, with the options shuffled each attempt. - Pass mark: 75%. - Certificate: issued automatically on passing, according to Knowledge subject reference: AMC 20-22 Target Groups 1 and 2; AMC5 145.A.30(e). Practical competence and authorisation require separate organisational assessment. ## Classroom training equivalent Approximately 8 hours of classroom-equivalent study, case analysis and review. This is an instructional planning estimate, not measured online attendance or a regulatory minimum. ## Related training topics - [EASA EWIS Target Group 1 & 2 online course](https://mxcourse.net/training/ewis-training.md) ## Guides - [How to choose online EASA-aligned training](https://mxcourse.net/guides/choosing-online-easa-training.md) - [A map of EASA continuing-airworthiness training](https://mxcourse.net/guides/easa-continuing-airworthiness-training-map.md) ## Common questions ### Is this EWIS Target Group 1 and 2? Yes. It is initial knowledge training for TG 1 maintenance and TG 2 inspection personnel, referenced to AMC 20-22. ### Does the course include practical wiring work? No. It is online knowledge and decision training. Practical competence and task authorisation remain with the organisation. ### How long is this course? The published classroom-equivalent estimate is 8 hours. Self-paced completion time varies. The figure is a planning estimate, not measured attendance. ### Do I get a certificate? Yes. After every module is complete, a 12-question examination must be passed at 75%. A named certificate is then issued automatically and can be checked on the public certificate checker.